Electric bikes are viewed as more complicated than regular bikes by many people. However, this could not be further from the truth!
When riding an electric bike for the first time, many people find it very easy and often feel that they are more stable and fun than a regular bike. This is because electric bikes have a motor that assists when pedaling.
However, being a first-timer, safety is paramount. Keep reading and learn everything about how to ride an e-bike safely here.
Read the Product Manual Carefully
Riding an electric bike for the first time can be daunting, primarily if you’re used to riding a regular bike. However, there’s no need to worry –make sure you read the product manual carefully before you get started.
This will give you all the information you need about operating your new bike, including how to charge the battery and how to use the throttle.
Most manuals also include helpful tips for first-time riders, such as where to position your feet on the pedals and how to turn corners safely.
Make Sure Your E-bike Is Assembled
Regular and electric bikes may look similar, but first-time riders should know a few critical differences before hitting the road.
Putting together an electric bike properly before riding it is one of the most important things. This may seem challenging, but it’s pretty straightforward if you know what to do.
First, tighten all screws and bolts until they are snug. Next, check the tire pressure and inflate the tires to the recommended level. Finally, test the brakes to ensure that they’re working correctly.
Getting Familiar With Your E-bike
If you’re a first-time rider, there are a few things you should familiarize yourself with about electric bikes before getting on one. First, they operate using a battery-powered motor, for starters, requiring less pedaling effort than traditional bikes.
Additionally, electric bikes typically have three different modes – low, medium, and high – which allow riders to adjust the amount of assistance they receive from the motor.
To learn how to use the different features of your e-bike, you should read the owner’s manual that came with it.
Make Sure Your Battery Is Charged
The next step after familiarizing yourself with your e-bike is to charge the battery. It is important to note that electric bikes have two different batteries – lead-acid and lithium-ion.
To charge, connect the battery to the charging port on your bike and plug it into a power outlet. A green light will usually appear on the charger as soon as the battery has been fully charged.
Refer to the owner’s manual for more information if you’re unsure how long it takes to charge your specific battery.
Make Sure Your E-bike Brakes Are Working Properly
Working brakes are essential for your safety, especially if you are riding an electric bike for the first time. Understanding that e-bikes are much faster than regular bikes is fundamental and hence the need for working and efficient brakes.
Squeeze the brake levers while the bike is stationary to test your brakes. If the brakes are working correctly, you should feel slight resistance when squeezing the levers.
If you don’t feel any resistance or if the brakes feel too loose, it’s essential to get them adjusted by a professional before riding.
Make Sure Your Tires Are Inflated
Another thing to check before riding your e-bike for the first time is the tire pressure. This is especially important if you’re riding on roads or paths with many bumps and obstacles.
To inflate your tires, use a bike pump to fill them up to the recommended pressure. You can find this information in your e-bike’s owner’s manual.
Riding on tires low on pressure may lead to irreparable damage to the tires, which may be costly to get a replacement.
Wear Appropriate Gear When You Are Riding
Proper safety gear is crucial when riding an electric bike, especially if you’re a first-time rider.
At a minimum, you should always wear a helmet to protect your head in case of an accident. Additionally, it’s a good idea to wear bright clothing so that you’re visible to other vehicles on the road.
If you’re going to be riding in areas with a lot of traffic, it’s also a good idea to wear reflective gear to be easier to see. Knee and elbow guards are also good, especially if you’re riding on rough terrain.
Find a Comfortable Riding Position
The perfect riding position will vary depending on the type of e-bike you have and your personal preferences.
However, there are a few things to keep in mind when finding a comfortable position. First, you want to make sure that you can reach the handlebars comfortably without stretching.
Second, you want to be able to pedal without having to put too much strain on your legs. And finally, you want to be able to reach the brakes easily in case you need to stop.
Once you’ve found a comfortable position, make sure to adjust the seat and handlebars to lock in place.
Find a Flat and Open Area
Riding an electric bike for the first time can be intimidating, so finding a flat and open area to practice is crucial.
A parking lot or a quiet street are both excellent options. Once you’ve found a good spot, do a few runs to feel how the bike rides.
Start With Level One Pedal Assist Setting
It is wise to start small and then work your way up. Starting with a level one pedal will give you more confidence, but it is safe so that in case you need to stop, you can do so quickly.
As you get more comfortable with the bike, experiment with the other pedal assist settings.
Once you are familiar with e-bike tips and tricks, you are ready to start.
Remember to always ride safely and within the law. Electric bikes are a great way to get around, but they are not toys.
Be sure to follow all the road rules and always ride defensively.
Have fun and enjoy!
Read also: Can Electric Bikes Get Wet?